Still waiting for the headers to arrive so I finished the
radio install. Got both receivers hooked up and all the servos programmed. One receiver controls the left side of the plane and one the right side. Each rudder servo is plugged into separate receivers.
With
so much room it was easy to place everything where I needed to balance the
plane. I wanted to do a push/pull on the rudder but that would make this plane
very tail heavy so I used the self-adjusting SRW servo tray for a pull/pull.
Tail wheel is complete and the removable rudder wire is
secure with a small carbon strap I made.
About the only thing left now is getting exhaust mounted so
the maiden should be soon. Stand by.
No comments:
Post a Comment